Follow my blog with Bloglovin

DIY »Tulle scrunchie«

In sisterMAG No. 63 we share with you many DIYs that you can do in just a few steps. Here we show you the DIY »Tulle scrunchie«. Try it out – we wish you lots of fun sewing!

Download (PDF, 1 MB)

DIY »Tulle scrunchie«


  • Pattern
  • Tulle fabric
  • Scissors
  • Rubber – 18 cm long
  • Sponge rubber
  • Two safety pins
  • Needles
  • Adhesive tape
  • Sewing machine
  • opt. iron


  1. Cut out the template, glue it together, pin it to the fabric so that it does not slip and cut it to size.
  2. Fold the tulle strip right sides together lengthwise in the middle.
  3. With 1 cm distance, sew the strip together, lock the ends. Then turn over.
  4. Then iron at a very low temperature.
  5. Pull the elastic through the tunnel using the safety pins. Knot the ends together or sew them together with a zigzag stitch.
  6. Fill the scrunchie with foam rubber.
  7. Tuck one end of the scrunchy into the other end a little. It is best to fold the ends a little. Now sew the ends together at the edge. Make sure that the elastic is inside and is sewn together.
  8. Pull the scrunchie into place. Done! :)

Interested in more DIYs? Find more freebies and DIYs here on our webiste!