Rodin’s »Thinker« Cake Topper DIY
Cake Topper DIY
- Printed template
- Wire, 2mm wide
- Wire, 1mm wide
Step 1 Print the template.
Step 2 Cut off 30cm of the 2mm wide wire with the pliers.
Step 3 Put the wire on the drawing no. 1 and bend the wire carefully on the drawing. Start from the top. Cut off the wire which is left at the end with the pliers.
Step 4 Now cut off 30cm of the 1mm wide wire with the pliers. Tie the top of the first face (simply tighten the wire) and place it on the line of the drawing no. 2 and bend it carefully.
Step 5 Attach wire to the first face at the point of the chin and continue with the drawing of the ear. Finally, remove the excess wire with the pliers.
Show us your creation by tagging the hashtags